New Arrivals/Restock

Seco-Larm EV-Y2251-AMWQ 4-in-1 HD TVI, CVI, AHD, Analog Varifocal Turret Camera

flash sale iconLimited Time Sale
Until the end
11
57
35

$26.32 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New  $52.64
quantity

Product details

Management number 205060881 Release Date 2025/10/16 List Price $26.32 Model Number 205060881
Category
  •  2MP Resolution
  •  ICR Module
  •  Joystick OSD control
  •  2DNR & 3DNR (Digital Noise Reduction)
  •  Heavy-duty vandal-resistant design
  •  Rugged, weatherproof (IP66) construction
  •  Split-glass design eliminates IR reflection
  •  Cables concealed in bracket to prevent tampering

 

Specifications

Housing color White
Type Varifocal Turret Camera
CMOS 1/2.7″ 2MP CMOS
Resolution 1920 x 1080
3DNR Yes
2DNR Yes
Viewing Angle 38°~138°
# of IR LEDS 40 (SMT)
FPS PAL:25FPS
NTSC:30FPS
F-Stop F1.6
Minimum Illumination – IR On 0Lux
Minimum Illumination – IR Off 0.05Lux
Operating Voltage 12VDC
Operating Temperature -22°~131° F (-30°~55° C)
Dimensions ø4 15/16″x 4 5/16″
(ø125x110mm)
Weight 1-lb, 9.4-oz (720g)

 

Troubleshooting

The screen is blank
  • Check that the camera is powered up.
  • Check that the power supply’s polarity is correct.
  • Check that the monitor is powered up.
  • Check that the video cable connecting the camera to the monitor is connected properly.
The screen image is dim
  • Clean the lens using a soft, clean cloth.
  • Check that the light source is adequate.
The screen has poor contrast
  • Adjust the monitor’s contrast knob
  • Change the position of the camera
The screen image flickers
  • Change the position of the camera, check cables and format setting
The screen image is distorted.
  • Change the position of the camera, check cables and format setting
The camera case is hot
  • Check that the correct power supply is in use
The image is foggy or washed out at night
  • Check that there are no objects very close to the camera
  • Check that there are no highly reflective objects in the scene
IR LEDS do not turn on
  • Check that the correct power supply is in use

Correction of product information

If you notice any omissions or errors in the product information on this page, please use the correction request form below.

Correction Request Form

Product Review

You must be logged in to post a review